Accelerator of Ordinary Portland Cement

• Model No.: FC-5

FC-5 is a kind of highly reactive aluminate mixed cementitious mineral binder targeting to improve the ordinary Portland cement with long setting time and low early strength, which can be used as quick hardening additive and set accelerator at low temperature. The product is a cement-based material, stable...

High Effective Gypsum Retarder

• Model No.: GRH 150P

GRH 150P is a high performance set retarder based on amino acid derivatives, and specially recommended for calcium sulphate or gypsum based binding materials. It shows excellent retarding effect for hemihydrate and has negligible effect for the final strength. GRH 150P has good efficiency at low dosage, significantly...

Super White CSA Cement High Early Strength

• Model No.: SAC 62.5HW

With appropriate ingredients of raw material, SAC 62.5HW is calcined from major mineral materails such as anhydrous calcium sulfur aluminate/calcium sulfate and small quantity cement clinker components such as calcium silicate/calcium aluminate, other natural mineral mixtures and the right amount of gypsum with...

Dispersion Polymer Powder for Wall Plaster & Adhesive

• Packaging: 25kg/bag
• Min. Order: 1000 Kilogram
• Model No.: INNOFLEX F222
• Type: Other

Redispersible Polymer Powder VAE Powder Characteristics: -Better deformability --Increased adhesion to a variety substrates --Improved wetting of the substrate --Higher flexural strength and flexibility --Increased impact and abrasion resistance --Higher durability and freeze thaw resistance Application: --Tile...

RDP for Wall Plaster & Putty

• Packaging: 25kg/bag
• Min. Order: 1000 Kilogram
• Model No.: INNOFLEX F221
• Type: Other

Redispersible Polymer Powder VAE /Redispersible Polymer Emulsion Latex Powder/RDP Powder/Redispersible Polymer Powder/ for Concrete and Mortar/for Construction VAE RDP is a polymer powder with multipurpose, widely used in joint filler mortar , wall putty / wall skim coat and binder as a film forming agent, which is...

Redispersible Polymer Powder for Wall Plaster and Putty

• Packaging: 25kg/bag
• Min. Order: 1000 Kilogram
• Model No.: INNOFLEX F220
• Type: Other

Redispersible Polymer Powder Redispersible polymer powder produced by spray-drying special water-based emulsion, mostly based on vinyl acetate and ethylene. It dissolves in water easily and quickly forms emulsion. Application - Waterproof mortar - Tile Adhesive/Tile joint filler - Flexible waterproof putty Key...

Polymer Powder for Standard Tile Adhesive

• Packaging: 25kg/bag
• Min. Order: 1000 Kilogram
• Model No.: INNOFLEX F415
• Type: Other

Redispersible Polymer Powder INNOFLEX F415 is redispersible polymer powder based on vinyl acetate and ethylene copolymer. It provides excellent dispersibility and good compatibility to all kinds of inorganic binders. It can improve the workability in wet mortar. After mortar hardens, it can greatly improve the...

Performance Water-based Epoxy Emulsion

• Model No.: WE 6180

WE 6180 is a modified non-ionic epoxy emulsion with low solvent content and low harmful air pollutants. Two-component ambient curing coating can be prepared with water-diluted amine curing agent. It is suitable for industrial anti-corrosion and heavy anti-corrosion, epoxy floor, cement mortar and also widely used for...

Epoxy Emulsion for Industrial flooring

• Model No.: WE 6160N

WE 6160N is non-ionic epoxy dispersion, can be combined with polyamine curing agent to prepare two-component ambient curing coating, suitable for general industrial anti-corrosion and heavy anti-corrosion, epoxy floor, cement mortar and other application fields. Characteristic: - Fine, uniform particle size and...

Water Based Epoxy Resin For Floor Coating

• Model No.: WE 6130

WE 6130 is is a modified non-ionic epoxy emulsion with low solvent content and low harmful air pollutants. Two-component normal temperature curing coating can be prepared with water-diluted amine curing agent. It is suitable for industrial anti-corrosion and heavy anti-corrosion, epoxy floor, cement mortar and it can...

Epoxy Emulsion for Industrial Coating

• Model No.: WE 6120

WE 6120 is a non-ionic epoxy emulsion with low solvent content and low harmful air pollutants. Two-component ambient curing coating can be prepared with water diluted amine curing agent, mainly used in general industrial anti-corrosion and heavy anti-corrosion and other application fields. It can also be used for...

Enhanced Polycarboxylate Superplasticizer Powder

• Model No.: PPC 2206

PPC 2206 is a kind of powder form performance enhanced polycarboxylate ether superplasticizer manufactured through optimizations of molecular configuration and synthesis process. It is suitable for cementitious mortar with requirement of high fluidity and high strength. PPC 2206 is well compatible with various cement...

Superfine Zirconium Silicate Powder

• Model No.: ZSA 6

ZSA 6 is zirconium silicate with good chemical stability, and which is not affected by the firing atmosphere, and it can significantly improve the green glaze bonding performance and increase the hardness of ceramic glaze; The whitening effect of zirconium silicate is due to the formation of plagioclase zircon after...

Superfine Aluminum Dioxide Powder

• Min. Order: 1000 Kilogram
• Model No.: ACG 300

Product Name: Fine powder of calcined alumina Grade Name: ACG300 Chemical Name: Alumina / Aluminum Oxide Molecular Formula: Al2O3 H.S. CODE: 2818 2000 CAS No.: 1344-28-1 Characteristics： l High conversion rate and crystal stability and low impurities. Its products have the excellent l performance of high mechanical...

PU Dispersion For Waterproof Coating

• Packaging: 160L/drum
• Min. Order: 800 Kilogram
• Model No.: URD 3510

URD 3510 is an anionic aliphatic polyether polyurethane dispersion used in waterborne one-component polyurethane waterproof coatings. It can replace solvent type polyurethane waterproof coating for toilet, basement and exposed roof. Biocide: (CMIT:MIT=3 :1) 0.014‰，MIT 0.200‰. URD 3510 is waterborne, low odor and...

Waterborne Elastomeric Polyurethane Dispersion

• Packaging: 160L/drum
• Min. Order: 800 Kilogram
• Model No.: URD 4800

URD 4800 is an anionic aliphatic polyester-polyurethane dispersion for waterproof coating. It offers good elongation and tensile strength. Biocide: (CMIT: MIT=3:1) 0.049‰, MIT 0.1‰. It has excellent mechanical property in waterproofing products. Product Properties *These properties are typical but do not constitute...

Sodium Lignosulphonate for Well Cementing

• Packaging: 25kg/bag
• Min. Order: 1000 Kilogram
• Model No.: SFA 090

SFA 090 is sodium lignosulfonate, a chemical modified product of natural lignin. It is brown powder, slightly aromatic, nontoxic and non explosive. SFA 090 can be used as antiflocculant in oil drilling process to prevent solid condensation. It is stable under the high temperature (150-250 ° F) in the borehole during...

Curing Agent for Waterborne PU Coating

• Packaging: 200L barrel
• Min. Order: 1000 Kilogram
• Model No.: YL-W6200A
• place of origin: China
• main ingredient: Polyurethane

YL-W6200A is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate; It can be used as a crosslinking agent component of waterborne two-component polyurethane system and as an additive to improve the performance of waterborne coatings. Properties Other data The following are typical features of...

Lab Use Cement Mortar Mixer

• Model No.: JJ-20H
• power: Electronic

Purpose and applicable scope The cement mortar mixer of model JJ—20H is manufactured based on the unified drawing of the China Building Material Council. This standard equipment is used to implement the international strength test method (ISO679) in China. It may replace JC/T722 as the mixer for GB/T17671 Test Method...

Compressive & Flexural Two-in-One Testing Machine

• Model No.: DYE-300S
• power: Hydraulic

DYE-300S is a constant Compressive/Flexural tester, which is a product of the ordinary pressure tester. It adopts computer digital control and effectively avoids the influence of manual operation. It can be used for the compressive strength test of mortar and flexural compressive strength test of cement mortar, as...

Universal Tensile Testing Machine

• Model No.: DL-5000
• power: Hydraulic

Universal tensile testing machine is controlled by microcomputer touch screen, ball screw drive, LCD touch screen display, with curve display and it can print test data directly with provided printer. It can be widely used to test several physical and mechanical properties or other mechanical properties for waterproof...

Rapid-hardening Sulphate Aluminium Cement

• Packaging: 50kg/bag
• Min. Order: 10000 Kilogram
• Model No.: SAC 42.5
• Type: Other

Hardening Accelerating Admixture CSA cement SAC 42.5 is fast-setting or rapid-hardening sulphate aluminium cement. It is hydraulic binding material consisting essentially of anhydrous calcium sulpho aluminate and dicalcium silicate (C2S). Under state-of-art production process, it gives stable and consistent...

Calcium Sulphoaluminate Cement (CSA Cement)

• Packaging: 50kg/bag
• Min. Order: 10000 Metric Ton
• Model No.: SAC 42.5
• Type: Other

Hardening Accelerating Admixture CSA cement SAC 42.5 is rapid-hardening sulphate aluminium cement, and considered as special cement different from ordinary porland cement. It is hydraulic binding material consisting essentially of anhydrous calcium sulphoaluminate and dicalcium silicate. Certain quantity of gypsum and...

Silicone Powder for reducing water uptake

• Packaging: 15kg/bag
• Min. Order: 1000 Kilogram
• Model No.: SCH 85
• Type: Water Repellent Admixture

Hydrophobic Agent: Silane Based Hydrophobic Powder SCH 85 is silicone based hydrophobic powder, a kind of ternary fine particles, which is composed of powder carrier, colloidal coating material and organic silicon active component which is easy to dry and disperse. The colloidal coating material can keep the active...