Hpmc Cellulose Ether:
1. water-soluble, non-ionic cellulose Cellulose Ether
2. odorless, tasteless, non-toxic, white powder
3. dissolved in water, forming a clear or slightly solution
4. properties of thickening, binding, dispersing, emulsifying, film-forming, suspension, water retention and protective colloid.
INNOCEL 1025S has been developed to improve the workability and water retention properties of dry mortars. INNOCEL 1025S has a medium to high viscosity and provides the finished product with higher water retention capability. INNOCEL 1025S will give excellent stability over time. It is compatible with all conventional mineral binders used in cement-based or gypsum based dry mortar formulations.
It allows manufacturing wide applications like tile adhesive, skim coat, thin bed adhesive and plaster for ALC/AAC, and gypsum based render etc.
INNOCEL 1025S can provide excellent workability to those mortar products with high water retention, good heat resistance, good workability and excellent wet adhesion. Typical addition level for aforementioned mortars is 0.2~0.7%.
Product properties
Constitution | Methylhydroxypropyl cellulose |
Appearance | white or yellowish powder |
Viscosity | 40,000~50,000 mPa·s (2 % solution Brookfield RV; 20 rpm, 20 ℃) |
Moisture content | ≤ 5.0% |